For a test project at work, we’ve been working out a quick and easy way to attach a pico projector to a tripod, along with a small piece of foam-core to project onto, keeping both adjustable. We had worked out a set of wooden slats that would form a slide rule of sorts, allowing us to slide the foam-core back and forth but keeping the projector stationary, and a 3D printed piece that would wrap around the wood to keep the sliding part stay in the channel.
I went to Lowe’s to get some wooden 1×2’s to make our holder, and my first thought was to go to the large saw where they cut material. Quite often they will toss small pieces that are waste pieces after cuts behind the saw. These pieces of word are normally free. Well, I’ve never paid for a piece of this scrap, but I suppose they may charge in some places. Regardless, I was disappointed that they didn’t have much scrap. But, what they did have, were pieces of wood that were exactly the shape I was going to make with 1×2’s! I asked the gentleman running the saw where I could find those, and he informed me they were the pieces of wood that hold together the large pallets of lumber, and that they didn’t actually carry them. I explained what I was going to make with the 1×2’s and he said “well, you can just have one of these. I’ll cut it too if that’s too long.” Yes, please!